|
FRONT Adjustable
Panhard Rod with Rubber bushes
Series 2 on GU Nissan
Patrol Coil Sprung, some Coil Cab Utes.

This listing is for one brand new ADJ
Panhard rod suit Late Model GU Patrol, If you have a GU and unsure if this
is right for you, The front panhard rod will have different size bushes, this
will be quite obvious to look at, the later model's have a much larger spherical
bush on the diff end. If they are the same size, We have these in our store
aswell.
These panhards are supplied with a revised fine
pitch thread, This is better than most other’s on the market, as the fine pitch
helps the nut bind into the thread, and not come undone due to corrugations
ect.
ADJ Panhards can be fitted to any vehicle above 2" of
lift, The higher you lift the vehicle the further the body moves of the
centre line to chassis, on a 3" lift it is approx 5-10mm, 4" is approx 15-20mm
off centre. At 4" of lift you will need to fit adjustable Panhards.I personally have a 3" lifted GQ LWB wagon and have both front
and rear ADJ panhards to ensure it is straight as possible,
I personally have a 3" lifted GQ LWB wagon and
have both front and rear ADJ panhards to ensure it is straight as possible,
They are easy enough to install at home in the
driveway, Firstly remove the original panhard, knowing the measurements
given above you can generally adjust the new arm to be that much longer then the
std arm, then trial fit and you can measure if it is correct.
MEASURMENT In order to ensure you have it as
centre as possible, you can measure between the back of the disc rotor/drum to
the chassis rail, compare this measurement from left to right to get it
centered. Or you can just do it by eye.
When you are happy it is at the correct length, it is
recommended to apply a small amount of loctite to ensure the locking nut stays
secure, the cup washer should be facing outwards, so it mushrooms the bush out,
not captures the bush, have a look at the washer, you will see what I
mean.
That's pretty much it, any questions ask
away.
In stock ready to
go
|