Front Adjustable Panhard Rod with bushes
This listing is for one brand new ADJ Panhard rod suit Land Cruiser,
These panhards are supplied with a revised fine pitch thread, This is better than most other’s on the market, as the fine pitch helps the nut bind into the thread, and not come undone due to corrugations ect.
All of our Panhards and control arms come with bushes to increase longengevity and flexibility of the bush.
ADJ Panhards can be fitted to any
vehicle above 2" of lift, The higher you lift the vehicle the further the
body moves of the centre line to chassis, on a 3" lift it is approx 5-10mm, 4"
is approx 15-20mm off centre. At 4" of lift you will need to fit adjustable
Panhards.I personally have a 3" lifted GQ LWB
wagon and have both front and rear ADJ panhards to ensure it is straight as
In order to ensure you have it as centre as possible, you can measure between the back of the disc rotor/drum to the chassis rail, compare this measurement from left to right to get it centered. Or you can just do it by eye.
When you are happy it is at the correct length, it is recommended to apply a small amount of loctite to ensure the locking nut stays secure, the cup washer should be facing outwards, so it mushrooms the bush out, not captures the bush, have a look at the washer, you will see what I mean.
is on stock