CSSP9025 - 90 series Toyota Prado ISUZU D-MAX 2012- strut spacer 25mm
25MM COIL STRUT SPACERS - PAIR
Toyota Prado 90 series
HOLDEN COLORADO RG 06/2012-2014
FORD RANGER PX 09/2011 on
25MM Thick spacers = Approx 37mm Lift
Kits Contain - Pair of Coil Strut Spacers - Plus all Fitting Hardware (studs, nuts etc.)
These are a cheap and effective way of leveling out your vehicle, or getting that bit of extra height, over and above what a conventional spring can do for you IFS Vehicle, With most IFS vehicles hitting the market with their nose down already!
Preparation of coil strut spacer...
Fitment of Coil Strut Spacer to vehicle
Remove the strut from the vehicle
Place the coil strut spacer on the top plate of the strut with studs facing up.
Using nuts supplied, attach to strut top plate.
Replace the strut back into the vehicle locating the top 3 studs first, with factory nuts.
When aligning the lower strut mount you may need to compress the spring to allow for relocation.
IMPORTANT: It is recommended
to arrange a front end wheel alignment after installation.
Failure to do so can result in alignment issues and uneven tyre wear.
It is recommended that the Coil Strut Spacers are installed by a qualified and licensed mechanic. These instructions are only included as a rough guide to installation. All Bolts and Hardware removed should be double checked to ensure re-fitment to relevant factory specifications.
Check with your local Roads Authority to determine if the installation of Coil Strut Spacers are legal in your State.
|Brand||Road Runner Offroad|
Be The First To Review This Product!
Help other Road Runner Offroad users shop smarter by writing reviews for products you have purchased.