ULTIMATE 300M RCV CV & Axle set GU Y61 fits Nissan patrol 300MM inner axle

Ultimate stength with 300M CV and 300M Inner Axle

RCV Proformace CV and axle set

suits:

GU Patrol Y61 Patrol

Does not suit Factory Automatic locking hubs

Made in the USA

Manufactured in the U.S. using only Ultimate strength 300m and chromoly materials, RCV Performance Ultimate CV Axle set simply replaces your weak Nissan Patrol Y61's axle shafts with a new high-strength design.
The factory axles were designed with 31 splines at the differential, and neck down to 27 Spline at the CV creating a common failure point.
This axle set upgrades the weak 27 splines at the CV to a 300M 30 spline race eliminating the need to neck down the shaft.
Tests prove Ultimate CV Axles to be twice as strong as OEM shafts, and they're just as tough at a straight angle as they are at extreme angles.
Even if you have big tires and big power there are no worries. Ultimate CV Axles are low maintenance and operate with a smoothness you can feel - whether off road or on the street.
And we back it all with a "No Questions Asked" limited lifetime warranty FOR Tyre size up to 40" Dia.

Axle set includes right and left inner axle shafts & 2 pregreased CV joints. Plus Bonus RCV MOLY GREASE

LIMITED LIFETIME WARRANTY

RCV warranties mechanical failure of the product for the duration of ownership by the original purchaser.

“Mechanical failure” is defined as failure of a component function while operating under design constraints.

All claims are subject to review and acceptance by RCV Performance Product ™ in its sole discretion.

All transport costs for warranties to be covered by the purchaser.

Warranty does not cover:

Intentional or willful destruction of product
Worn items including internal cv joint parts,race, balls etc
Twisted splines/bars
Boots
Stripped Threads
Modification of the product
Failure from improper installation
Failure from other than intended use

Supplied with Axle Kit – D7943 Trust Block for RD136 Lockers

This optional ARB Locker Spacer is designed for use with RD136 ARB Lockers and is included in this axle kit. It functions as a trust block, helping to prevent the axle from floating inward under extreme conditions and providing additional safety in the event of axle retaining clip failure.

D7943 Fitment Information:

Trimming of one axle end may be required, depending on gear ratio and locker configuration.
Identification of which axle requires trimming will become clear during spindle installation.
Typically, approximately 5mm may need to be trimmed from the axle spline on one side only.
Trimming can be safely achieved using an angle grinder with a thin cutting disc.
This modification does not affect axle strength and does not void the RCV warranty
The ARB locker centre must be disassembled to install the spacer.
Spacer installation cannot be completed while the locker centre is installed in the vehicle.

Please note this product is an aftermarket product that is designed to fit the above mentioned vehicle(s), any mention of vehicle brand or model is only to allow you to establish the correct fitment for your vehicle, and is not indicating that the part is manufactured by the original vehicle manufacturer.

(CVJ3525-BSPM)