Idler arm to suit Toyota Hilux 8/97 on

 

If you have noticed your steering becoming vague over time, as in you can move the steering wheel a few inches either way and nothing happens, or if you suffer from bump steer, hit a bump or pothole and the car jumps and changes direction, or general vibration that is not caused by obvious things like tyre balance, Then you most likely have worn tie rod ends or Idler arm.

 

 

 

Well this will fix it for you, a brand new high quality Idler arm; To suit specific vehicle models...

 
SX9445
Idler Arm
Toyota Hilux 8/97-on KZN165, LN16#, LN17#, LN19#, RZN16#, RZN174, RZN19# 4WD
 

 

When fitting this Idler Arm care must be taken to ensure that the stops that come into contact with the arm must touch at EXACTLY the same time as the steering stops, at the back of the front wheel, make contact. “Stop” adjustment should be periodically checked, especially if new wheels or tyres are fitted.

 

 

 

 

Please note this product is an aftermarket product that is designed to fit the above mentioned vehicle(s), any mention of vehicle brand or model is only to allow you to establish the correct fitment for your vehicle, and is not indicating that the part is manufactured by the original vehicle manufacturer.

 

 

 

(SX9445)

SKU SX9445
Model # SX9445
Barcode # 9319478201163
Brand Roadsafe 4WD
Shipping Weight 2.9000kg
Shipping Width 0.240m
Shipping Height 0.080m
Shipping Length 0.240m