EGR Blanking plateMazda & Ford
Manufactured from quality stainless steel
 
4WD -3.2L i5 Engine EGR Blanking Plate - 64mm Hole C/C
 
 
To Suit
 
Mazda BT50, Ford Ranger2011 On 3.2L 5cyl engine only

Things to know before undertaking this Mod

1) It is not a legal modification to change the way the vehicle’s emission control system functions. This modification is recommended for off road and race vehicles. There is however no road side diesel emissions testing of vehicles in Australia. All Diesel emission tests are carried out at the time of original engine certification.

2) In some cases fitting an EGR blanking plate will cause a fault code to appear or the “check engine light” to come on. This is because the ECU will read an incorrect flow on the EGR system. For these type vehicles we have an EGR blanking plate with a 10mm hole in the centre to allow enough EGR flow to satisfy the ECU whilst restricting the majority of exhaust gas to the intake. Unfortunately however this is not an exact science and we have seen the very rare example of a code being thrown on a vehicle that hundreds of the same vehicle had previously not had any issues with. In these cases we are reluctant to offer for sale a plate with a 10mm hole and instead suggest that you remove the plate and drill your own 10mm hole which should fix your individual issue.

In all cases we leave it up to the individual customer to decide if they wish to do this modification

 
 
 
 
 

(004-EGR)

SKU 004-EGR
Brand Road Runner Offroad
Shipping Weight 0.0500kg
Shipping Width 0.040m
Shipping Length 0.060m

Be The First To Review This Product!

Help other Road Runner Offroad users shop smarter by writing reviews for products you have purchased.

Write a product review


We Also Recommend



You May Also Like



More From This Category