Part Time Spool With Bearing Suit 80 100 105 Landcruiser lx470 Toyota Spool Part Time Spool Locker
or 4 payments of $122.50 with Info
- Ships from Pakenham, Victoria.
- Call us if you need to! We are here to help.
Toyota Landcruiser 80/100 Transfer Spool Locker
With New Quality Koyo Bearing
- Toyota Landcruiser 80 series
- Toyota Landcruiser 100 series IFS
- Toyota Landcruiser 105 series live axle
- Lexus LX450
- Lexus LX470
Transfer Case Part Time 4WD Spool Kit is an excellent option to increase the performance of your FJ80 or FJ100 Land Cruiser.The tough heat-treated 8620 tool steel spool and Delrin spacerreplacesthe rear differential case, spider gears, rear side gear, and viscous coupler in the transfer case center differential.This allows the drivetrain to be permanently locked to the rear wheels.As a result, the front drive flanges can be replaced with manual locking hubs (not included), which prevent the front axles, front differential, and front driveshaft from turning when 4WD is not needed.The result is improved steering feel on the road, less wear and tear on front axle components, and increased acceleration and fuel economy when not in 4WD.
Transfer Case Part Time 4WD Spool Kit includes the spool, Delrin spacer, spacer mounting screws.
Manual locking hubs, axle shaft spacers, and a Center Differential Lock Switch are required to complete the conversion to 4WD.
This kit is fully compatible with our Trail-Creeper FJ80/FJ100 3.116:1 Low Range T-Case Gear Set and can be installed at the same time.
Note:We highly recommend that you read the installation instructions thoroughly before ordering, as this will affect the way you engage 4WD on your vehicle. Also, after conversion to Part-Time 4WD, Front ABS will only function when the locking hubs are engaged.When the locking hubs are not engaged, the front brakes will function like a standard braking system (no anti-lock capability).
- Heat-treated 8620 tool steel spool with Delrin spacer.
- Includes spool, spacer, spacer mounting screws, and installation instructions.
- Converts Full-Time 4WD or All-Wheel 4WD to Part-time 4WD.
- Replaces the factory transfer case differential assembly and viscous coupler, permanently locking the rear output to the spool.
- Compatible withTrail-Creeper FJ80 3.116:1 Low Range T-Case Gear Set.
- Improves steering feel.
- Increasein fuel economy from not being in Full-Time 4WD (fuel savings dependent on driving habits and how often locking hubs are engaged).
- Less wear on front axle components.
- Requires FJ80 or FJ100 locking hubs, axle shaft spacers, and OEM Center Differential Lock Switch to complete conversion.
All products carry our 12 Month Limited Warranty. All warranties are limited to the original purchaser and are not transferable to subsequent owners of the product. The warranty period commences on the purchase date of the product. Trail-Gear warrants that it will repair or replace, free of charge, any eligible product which, under normal conditions of use and service, proves to be defective in materials or workmanship. This warranty does not cover any labor costs incurred in diagnosis of defects, removal or reinstallation of a product, nor does it cover any other consequential expenses.
|Format||PART TIME DIY 4WD CONVERSION KIT fits TOYOTA 80 SERIES LANDCRUISER FZJ HZJ HDJ|