52FPWBSWLS-P(PSI) - BLUE- Fuel pressure Gauge 52mm PSI with audible Alarm
or 4 payments of $30.25 with Info
- If it Shows IN STOCK- We have it in our warehouse.
- Tax Invoice for all purchases.
- Ships from Warragul, Victoria.
- Call us if you need to! We are here to help.
Race Tech PSIFuel pressure Gauge – 52mm
Super white Daytime - Blue Backlit when Headlights on
This is a 52mm PSIFuel Pressure gauge with a preset AUDIO warning which can be muted upon start-up. This makes it a fantastic choice for guys on the track, where you're too busy to look at gauges and an audio warning is just what you need to know when something is running past your pre-set warning point!
Main features of the Race Spec gauges...
- You can also recall your lowest (or in some gauges highest) point that was recorded on the gauge after you've had your race! This also becomes a very useful tuning tool.
- All gauges are FULL electronic, with electronic sensors (where applicable)
- The boost gauges tested in AUS were within .3psi of the dyno PSI. (0.3 psi being worst, 0.1 psi being best)
- A sensor is included with the gauge to make installation easy.
- Gauges come with FULL wiring kit, nothing else is needed, everything is plug_and_play (Although power needs to be hard wired)
- Once one gauge has power, a plug'n'play quick connect wire strand can be used between gauges. This makes installation VERY easy. (Refer to pictures)
- Every gauge comes with ELECTRONIC sensor to suit (except A/F ratio gauge)
- The gauge comes with a simple gauge mount (Usually this satisfies most customers and no additional gauge mounting hardware is required)
- All race spec gauges come in white display, red needle lighting withawire toactivateBlue for the face. (This can beplugged into your dash lights for activation with parkers or with a switch or omitted completely or the gauge can be wired to be constantly Blue.)
- You can piggy back the wiring, wiring supplied for the power wires to plug and play, so quick and easy for gauges in series. (sensors need to be wired individually)
The plugs on the back of the gauge are small and require a good firm fitment, if you fit these on the weekend and find they do not work, please ensure these plugs are in home,
They require a good tight fit to ensure vibration does not affect the wiring signal to the gauge.
Nothing worse than finding out Monday you could have had it all working over the weekend.
Used, tried and tested in Aus by the Road Runner Offroad Race cars and Social cars for a few years now. We even supply our own wiring instructions so easy to read!
In Stock ready to go!
We Also Recommend
You May Also Like
Others Also Bought
More From This Category