Road Runner Offroad Bullet 6.8HP Winch motor @5000RPM
COMP SPEC with Breather and Hi Temp Corrosion Resistant Paint
With reversible M6 / 1/4" UNC Solenoid mounting bolts!
Solenoid bolts allow the Bullet motors to be mounted to both M6 (Low mount/Redwinch etc.) and 1/4" UNC (Warn Highmount, GP, etc.) equipped winches. These allow the DC-88 Solenoid to be mounted on the rear of the motor making cabling easy and neat.
Unique reversible bolts include both metric and imperial hardware to ensure easy fitment to whatever winch you have.
Ideal replacement for warn 4.6hp and 6hp motors.
2mtr Breather hose with Polyurethane, nickle plated fittings and Ceramic Breather
Internal part are coated with Hi temprature Corrosion Resistant paint to prevent moisture damage
Standard warn spline output shaft ensures compatibility
Will fit XD9000, HI mount 8274, 9.5 XP and any winch compatable with Warn winch motor and spline shaft
6.8 HP output
200MM Total Length (excluding output shaft)

Coming into preference by winch challenge drivers due to the greater line speed and reliability to the Warn alternative.

The Bullet 6.8hp motor features large brushed for cool running, copper welded windings and heavy duty copper armature.

Motor body Length: 190mm/ with 90 Deg Breather Fitting 200mm


Brass Brush Holder to prevent corrosion and sticking brushes

12 Month warranty against manufacturing defects.

Where replacing an older high mount motor you will require the splined input gear (also available).


We always recommend that with a motor upgrade that due consideration is given to the electrical system supporting it. Large (50mm2) cable and correctly rated batteries and solenoids should be considered along with a minimum 800 CCA of battery capacity.



Brand Road Runner Offroad
Shipping Weight 10.0000kg
Shipping Width 0.100m
Shipping Height 0.100m
Shipping Length 0.200m
Shipping Cubic 0.002000000m3
Others Also Bought
More From This Category