FRONT Adjustable Panhard Rod with RUBBER bushes

for

Toyota Landcruiser 78 79 6cyl 4.2

This listing is for one brand new ADJ Panhard rod suit Land Cruiser,

These panhards are supplied with a revised fine pitch thread, This is better than most other’s on the market, as the fine pitch helps the nut bind into the thread, and not come undone due to corrugations ect.

All of our Panhards and control arms come with bushes to increase longengevity and flexibility
 

ADJ Panhards can be fitted to any vehicle above 2" of lift,The higher you lift the vehicle the further the body moves of the centre line to chassis, on a 3" lift it is approx 5-10mm, 4" is approx 15-20mm off centre. At 4" of lift you will need to fit adjustable Panhards.

MEASURMENT
In order to ensure you have it as centre as possible, you can measure between the back of the disc rotor/drum to the chassis rail, compare this measurement from left to right to get it centered. Or you can just do it by eye.

When you are happy it is at the correct length, it is recommended to apply a small amount of loctite to ensure the locking nut stays secure, the cup washer should be facing outwards, so it mushrooms the bush out, not captures the bush, have a look at the washer, you will see what we mean.

Please note this product is an aftermarket product that is designed to fit the above mentioned vehicle(s), any mention of vehicle brand or model is only to allow you to establish the correct fitment for your vehicle, and is not indicating that the part is manufactured by the original vehicle manufacturer.