GU Hub nut upgrade kit

This kit will suit all GQ Patrols - Ford Maverick



It Includes


1 x GU Hub Socket tool


Locking rings (S0511R) x 2

Bearing locking washers (S0506R) x 2

5x Screws (1 spare)


The GU Nissan Patrol have a refined wheel bearing locking nut system, This kit will let you upgrade your GQ Patrolto the GU style, so no more worrying about your wheel falling off and flogging out bearings prematurely!


They now suit the earlier model GQ’s and Mavericks.




Designed to be used with a ½” ratchet, on the late model hub nuts which we can also supply to upgrade from the earlier models.


When changing or adjusting wheel bearings, simply jack the vehicle of the ground, remove the hub and hub nut assembly, when you have replaced or repacked your bearings, place the Bearing Locking washer in first, then thread the large hub nut on to the stub axel, If you have installed new bearings rotate the wheel when tightening, if you don’t have a manual or torque wrench handy, tighten the nut until there is no play, when tight back of the nut no more than a quarter of a turn ensuring there is no play in the wheel or bearing, put the locking washer into position and install the two small screws.


After a couple of hundred km’s check to make sure the bearings are still tight by jacking the car up and testing for play.


We have the standard GQ socket to suit the earlier GQ’s in our store as well.

Please note this product is an aftermarket product that is designed to fit the above mentioned vehicle(s), any mention of vehicle brand or model is only to allow you to establish the correct fitment for your vehicle, and is not indicating that the part is manufactured by the original vehicle manufacturer.




Brand Road Runner Offroad
Shipping Weight 0.3500kg
We Also Recommend
You May Also Like
Others Also Bought
More From This Category