1 x 25mm Tail shaft Spacer for REAR Tail shaft to suit Nissan GQ & GU Patrol - Maverick


134mm OD - Suit rear Tail shaft for a Nissan Patrol


This listing is for 1 25mm Tail shaft spacer, this spacer has been machined from 1 solid piece of High quality machined Alloy.


Tail shaft spacers are required when you have a large amount of lift and the tail shaft is in danger of separating at the slip joint, they simply mount between the Diff flange and the tail shaft flange, longer bolts will be required.

A SWB Patrol should consider one of these at approx 3-4 inches of lift, a wagon at about 5” of lift, this is obviously spring lift, and Body lift is not included.


Whilst you are at it, Check to see if the tail shaft has been rubbing on the Gearbox cross member, common on vehicles with long travel in the rear, An easy solution is to turn the tail shaft around from front to back, This puts the small diameter end of the shaft to the front allowing more clearance.


*** Vehicles fitted with 2.8ltr Diesel or 3.0ltr RB30 need to change diff flange to 4.2ltr version***



Please note this product is an aftermarket product that is designed to fit the above mentioned vehicle(s), any mention of vehicle brand or model is only to allow you to establish the correct fitment for your vehicle, and is not indicating that the part is manufactured by the original vehicle manufacturer.








Brand Road Runner Offroad
Shipping Weight 0.8000kg
Shipping Width 0.120m
Shipping Height 0.030m
Shipping Length 0.120m
We Also Recommend
You May Also Like
More From This Category