Protect your vehicle's braking system with Penrite DOT 3 Brake Fluid, a high-quality full synthetic brake fluid designed to provide reliable braking performance and dependable hydraulic operation. Formulated for vehicles requiring DOT 3 brake fluid, it helps maintain effective hydraulic pressure transfer, supports consistent braking response and delivers reliable performance when used in accordance with the vehicle manufacturer's specifications.

Over time, brake fluid absorbs moisture from the atmosphere, which can reduce its boiling point and affect braking performance under demanding conditions. Penrite DOT 3 Brake Fluid is formulated with a high dry boiling point and a suitable wet boiling point to help maintain dependable braking performance during service. Its synthetic formulation is suitable for compatible hydraulic brake and clutch systems where DOT 3 fluid is specified by the vehicle manufacturer.

Designed for a range of compatible vehicles and equipment, Penrite DOT 3 Brake Fluid provides reliable hydraulic performance when correctly maintained and replaced at the recommended service intervals. Always confirm fluid compatibility before use, as selecting the correct brake fluid specification is essential for safe and effective brake system operation.

Features & Benefits

• Full synthetic formulation designed for reliable hydraulic brake and clutch system performance.
• Meets DOT 3 brake fluid performance requirements for compatible applications.
• High dry boiling point of 240°C (typical) helps resist vapour formation under demanding braking conditions.
• Wet boiling point of 150°C (typical) supports dependable performance as moisture is absorbed during service.
• Helps maintain consistent hydraulic pressure transfer for effective braking response.
• Suitable for hydraulic brake and clutch systems requiring DOT 3 brake fluid.
• Compatible with a range of passenger vehicles, 4WDs, motorcycles and commercial applications specifying DOT 3 fluid.
• Formulated for compatibility with appropriate brake system materials.
• Helps support reliable braking performance when maintained according to manufacturer recommendations.
• Suitable for applications requiring the relevant DOT 3 performance specifications.

Directions

• Check the vehicle manufacturer's handbook to confirm that DOT 3 brake fluid is the correct specification for the application.
• Ensure the brake fluid reservoir and surrounding area are clean before opening to minimise the risk of contamination.
• Use clean, fresh fluid from a sealed container and follow the vehicle manufacturer's instructions for topping up or replacing the brake fluid.
• If replacing the fluid, bleed the brake system according to the vehicle manufacturer's recommended procedure and sequence.
• Avoid introducing dirt, water, oil or other contaminants into the brake fluid or hydraulic system.
• Keep the container tightly sealed after use, as brake fluid absorbs moisture from the atmosphere.
• Avoid contact with paintwork, as brake fluid may damage painted surfaces. Clean up spills promptly using an appropriate method.
• Brake system servicing should be carried out by a suitably qualified person where required.

Note: DO NOT mix with silicone-based DOT 5 or mineral-oil-based hydraulic fluids. Always confirm fluid compatibility before use.

Suitable For

• Passenger cars requiring DOT 3 brake fluid.
• Compatible SUVs and 4WDs.
• Motorcycles with hydraulic brake systems requiring DOT 3 fluid.
• Compatible light commercial vehicles.
• Selected commercial and industrial equipment requiring DOT 3 brake fluid.
• Hydraulic clutch systems where DOT 3 fluid is specified.
• Brake and clutch hydraulic systems requiring the applicable DOT 3 performance standards.

Common Signs You May Need to Replace Your Brake Fluid

• Brake fluid has reached the vehicle manufacturer's recommended replacement interval.
• Brake fluid appears dark, dirty or contaminated.
• Moisture contamination has affected the fluid's condition or boiling point.
• The brake pedal feels soft or spongy.
• Braking performance changes under repeated or demanding braking conditions.
• Brake system servicing or repairs require fresh fluid.
• The vehicle's brake fluid service history is unknown.
• The existing brake fluid does not meet the vehicle manufacturer's required specification.

Using Penrite DOT 3 Brake Fluid helps support reliable braking performance, dependable hydraulic operation and consistent brake and clutch system function when the correct fluid specification is used and the system is maintained according to the vehicle manufacturer's recommendations.