Winch Cradle Mounting Plate

The mounting plate we use is universal, all that is required is to cut to length and fabricate to fit your vehicle.

If you have a Alloy Bull Bar it is recommended to mount the winch cradle to the Chassis rails, If it is a steel bar we recommendyouto fabricate and weld the cradle to your steel bar,

Dimensions are as follows

    • Length 92cm
    • Width inside to inside 171mm
    • Width outside to outside 179mm
    • Back lip height 45mm
    • Front lip 28mm
    • Front lip height which carries the fairlead 80mm
    • Length of lip hitch carries fairlead is 340mm
    • Made from 4 mm plate

Using these Winch cradle’s saves the cost of finding and buying a winch compatible bar, which is generally over a $1500.

On average it should take a competent fitter approx 3 to 4 hours to install the cradle and winch to your vehicle depending on make.

This cradle will suit the following winches and more....








Warn XD9000

Warn XP9500

Regardless of bullbar make, steel or Alloy, there is fabrication required to mount this and your winch to your vehicle






Brand Road Runner Offroad
Shipping Weight 8.0000kg
Shipping Width 0.200m
Shipping Height 0.100m
Shipping Length 1.050m
Shipping Cubic 0.021000000m3

We Also Recommend

You May Also Like

Others Also Bought

More From This Category