25MM COIL STRUT SPACERS - PAIR

Nissan Navara D40 COIL STRUT SPACER -

25MM Thick spacers = Approx 37mm Lift

Kits Contain - Pair of Coil Strut Spacers - Plus all Fitting Hardware (studs, nuts etc.)

These are a cheap and effective way of leveling out your vehicle, or getting that bit of extra height, over and above what a conventional spring can do for you IFS Vehicle, With most IFS vehicles hitting the market with their nose down already!

Preparation of coil strut spacer...

• Fitment of Coil Strut Spacer to vehicle
• Remove the strut from the vehicle
• Place the coil strut spacer on the top plate of the strut with studs facing up.
• Using nuts supplied, attach to strut top plate.
• Replace the strut back into the vehicle locating the top 3 studs first, with factory nuts.
• When aligning the lower strut mount you may need to compress the spring to allow for relocation.

IMPORTANT: It is recommended to arrange a front end wheel alignment after installation.
Failure to do so can result in alignment issues and uneven tyre wear.

It is recommended that the Coil Strut Spacers are installed by a qualified and licensed mechanic. These instructions are only included as a rough guide to installation. All Bolts and Hardware removed should be double checked to ensure re-fitment to relevant factory specifications.

Check with your local Roads Authority to determine if the installation of Coil Strut Spacers are legal in your State.