25mm extended Upper Ball Joint fits Nissan Navara D40 2008- on

Description
Specifications

25mm extended Upper Ball Joint

suits:

D40 Navara 2008-on

Please check the dia of your existing balljoint

42.30mm dia where the balljoint inserts in to the arm.

45.5mm Not Available in extended

If you have a lifted D40 Navara and during articulation you hear a clunk during

full articulation, it might be the Front Upper Control Arm making contact with the Coil. Roadsafe have

25mm extended Upper Ball Joints that fit to the Upper Control Arm, to space the arm far enough to

avoid the factory upper arm contacting the coil on full droop.

improves caster

Suitable for lifted vehicles. When the vehicle's suspension is lifted the upper arm moves to a downward position reaching the maximum angle of the standard ball joint.

This extended balljoing allows the arm to be returned to a near standard position allowing full suspension movement without binding.

Listing is for one ball joint suitable for the left or right of the vehicle. If replacing standard ball joints you will require 2.

Suitable for vehiclelifted with springsonly (Not Strut Spacers).

It is recommended that theBalljoints are installed by a qualified and licensed mechanic.

Check with your local Roads Authority to determine if the installation ofExtended ball jointsare legal in your State.

D40 Navara 2008-on

Heavy Duty Greasable design

Low friction and high performance
Mirror finished ball stud for smooth operation and longer wear
High quality CR (chloropene rubber) dust boot
High static and dynamic load capabilities
Rigorously tested

Please note this product is an aftermarket product that is designed to fit the above mentioned vehicle(s), any mention of vehicle brand or model is only to allow you to establish the correct fitment for your vehicle, and is not indicating that the part is manufactured by the original vehicle manufacturer.

(BJ4083)