Tie Rod end RH
to suit:
Nissan GQ Patrol 
This listing is for 1 Right Hand PATROL Coil Spring only  GQ 88-6/92 MALE Tie rod #TE979HD
Does Not suit Leaf spring Models
 
These can be found on the Tie Rod arm (rear of Diff) and Draglink (Front of Diff) of a GQ Patrol
 
Designed and manufactured to meet and exceed OME (original manufacturer’s equipment) they will last you another 20 years.
To determine if you need to replace the Tie Rod end on your Nissan Patrol, have someone turn the steering wheel for you from side to side, It does not need to be much, just enough to take up the load, Whilst they are doing this, And you are underneath, If you see or feel excessive movement you will need to replace them, Tie Rod ends are Roadworthy item.
 
When replacing, mark the original unit on the arm, measure from pin to pin, remove the worn Tie rod end, and replace with new one, thread it on to the mark you made, double check the measurement from pin to pin, Then install the arm, tighten the castle nut, ensure you replace the split pin.
If you are not totally comfortable with the measurement, it is recommended to get a professional Wheel alignment.
 
We also have upgraded heavy duty arms in our store with the big GU Tie rod ends, with Panhards and other products.
 
 
Please note this product is an aftermarket product that is designed to fit the above mentioned vehicle(s), any mention of vehicle brand or model is only to allow you to establish the correct fitment for your vehicle, and is not indicating that the part is manufactured by the original vehicle manufacturer.

(TE979HD-NissanY60GQPatrol)

SKU TE979HD-NissanY60GQPatrol
Brand Roadsafe 4WD
Shipping Weight 0.7000kg
Shipping Width 0.040m
Shipping Height 0.040m
Shipping Length 0.140m

We Also Recommend

You May Also Like

Others Also Bought

More From This Category