Terrain Tamer Heavy Duty

Toyota Land Cruiser Wheel Bearing kit (FRONT)

This kit is for one side only- Order 2x kits to do both sides 

Bearings- Are Made in JAPAN

Rockwell Hardness-  2.5 Times Higher Than OE Standard

Extra Heat Treatment Procedure For Longer Service Life

Seals Are a Internal Rotating Cartridge type with 4x sealing lips


Landcruiser HZJ78, FZJ78, HZJ79, FZJ79, HDJ78, HDJ 79 8/99-
Landcruiser VDJ76, 78 & 79 1/07-

Landcruiser FZJ HDJ FJ 80  - All Models
Landcruiser HZJ105, FZJ105 1/98-

BJ40 9/75-on  BJ42 7/80-on

FJ40 & 45  9/75 -on

FJ & HJ  60  - 8/1980-on  All Models 

FJ62 11/84- on

FJ70 73 75- All Models

FZJ 70 73 75


Contents: Inner & Outer Bearings, Oil Seal,  & Lock Washer & Gasket.



Wheel Bearings should be checked and adjusted regaurly, if you find any metalfillings, or the bearings are making a lot of high pitched squealing, this is not good, It is the bearing starting to disintegrate, and should be replaced immediatly.


If you are planning a big trip, and you know the bearings have not been changed for a few years, it is cheap insurance to replace them anyway.

If you find oil dripping onto your tyres, then the Axel seal is damaged and allowing your diff oil to run down the axels and past the seals, the problem with this is that on its way it has to push past the grease in your wheel bearings, causing excess heat and premature wear, This can create more problem's if left to long.

This kit is for one side only

If you plan to do both sides, you need two kits, please select two on checkout,



We only recommend and use quality Japanese parts for all of our maintence bearings and seals, we use Australian suppliers who believe in this as well.

A few tips for when changing or adjusting wheel bearings, simply jack the vehicle of the ground, remove the hub and hub nut assembly, when you have replaced or repacked your bearings, place the tab washer in first, then thread the large hub nut on to the stub axel, If you have installed new bearings rotate the wheel when tightening, if you don’t have a manual or torque wrench handy, tighten the nut until there is no play, when tight back of the nut no more than a quarter of a turn ensuring there is no play in the wheel or bearing, put the locking washer into position and tighten the locking nut.




Brand Terrain Tamer
Shipping Weight 1.1000kg
Shipping Width 0.100m
Shipping Height 0.060m
Shipping Length 0.100m
Shipping Cubic 0.000600000m3

We Also Recommend

You May Also Like

Others Also Bought

More From This Category